邱夷平

姓名   邱夷平   

职称   教授、博导   

办公电话   021-67792744   

通讯地址   松江区人民北路2999号   

电子邮箱   ypqiu@dhu.edu.cn   


  • 主要经历
  • 教学内容
  • 研究成果
  • 获奖荣誉
  • 更多信息
  • 主要经历

    教育背景
    1978年2月至1982年2月,就读于浙江丝绸工学院丝绸工程专业,获学士学位;

    1985年9月至1988年1月,就读于美国奥本大学纺织科学专业,获硕士学位;

    1988年1月至1992年1月,就读于美国康奈尔大学纤维科学专业,获博士学位;

    1992年1月至1992年7月,美国康奈尔大学,做博士后;

    1992年8月至1994年7月,美国麻省理工学院,做博士后;


    工作经历
    1994年8月至1995年6月,美国Timberland公司,任研发部材料科学家;

    1995年8月至1996年7月,美国堪萨斯州立大学,任助教授;

    1996年8月至2003年7月,美国北卡罗来纳州立大学,任助教授;

    2003年8月至今,东华大学,任校特聘教授、博士生导师;


  • 教学内容

    研究方向

    三维纺织结构制作技术和应用

    三维纺织结构复合材料性能研究

    三维纺织结构微带天线设计与性能

    纤维表面与界面研究

    纳米纤维与纳米材料开发和应用

    绿色复合材料研究


    教学课程
    (1)本科生课程:《纺织材料学》(全英语)、《纺织结构复合材料》(全英语)、《科研方法入门》

    (2)研究生课程:《纤维科学》(全英语)、《纺织复合材料》(全英语)、《科研方法》(全英语)


  • 研究成果

    科研项目
    1. 国家863计划项目“三维机织物为基础的微带天线系统结构设计和性能研究,”项目负责人, 2007年12月-2010年11月。

    2. 国防科工委基础科研项目,项目负责人,(秘密级)2006年1月-2007年12月。

    3. 上海市浦江人才计划项目“低成本超厚三维正交复合材料的织造和成型工艺研究”,项目负责人, 2005年1月-2007年12月。

    4. 国防科工委基础科研项目,项目参与人,(秘密级)2006年1月-2008年12月。

    5. 教育部长江学者创新团队子项目“常压等离子体表面处理技术”,课题负责人, 2006年1月-2007年12月。

    6. 十二五国家科技支撑计划子项目“基于三维机织物和三维机织复合材料的装备研究” 项目参与人,2013年1月-2014年12月

    7. 国家自然科学基金重点项目“复合材料三维织造成形制造技术及设备基础研究”子项目,项目参与人,2012年1月-2014年12月


    代表论文
    近5年发表论文

    1. Liang, Y., Cheng, S., Zhao, J., Zhang, C., Sun, S., Zhou, N., Qiu, Y., Zhang, X., Heat treatment of electrospun Polyvinylidene fluoride fibrous membrane separators for rechargeable lithium-ion batteries, Journal of Power Sources, 240:204-211(2013)

    2. Zhao, F., Jiang, Q., Chen, H., Xue, G. and Qiu, Y. Three dimensional woven fabrics as filter media in membrane bioreactor for wastewater treatment, Journal of Materials Science, 48:7869–7874 (2013)

    3. Liu, W., Zhao, H., Yong, Z., Xu, G., Wang, X., Xu, F., Hui, D., Qiu, Y. Improving Mechanical and Electrical Properties of Oriented Polymer-free Multi-walled Carbon Nanotube Paper by Spraying while Winding, Composites Part B. Engineering, 53:342–346 (2013)

    4. Yao, L., Rong, Q., Shan, Z., Qiu, Y. Static and bending fatigue properties of ultra-thick 3d orthogonal woven composites. Journal of Composite Materials, 47(5): 569–577 (2013)

    5. Zhou, N., Yao, L., Liang, Y., Yu, B., Ye, M., Shan, Z., Qiu, Y., Improvement of mechanical properties of ramie/poly (lactic acid) (PLA) laminated composites using a cyclic load pre-treatment method, Industrial Crops and Products, 45:94-99 (2013)

    6. Jiang, Q., Li, Y., Xie, J., Sun, Ji., Yao, L., Hui, D., Qiu, Y. Plasma functionalization of bucky paper and its composite with phenylethynyl-terminated polyimide, Composites Part B, 45(1): 1275-1281 (2013)

    7. Rhee, K.Y., Park, S.J., Hui, D., Qiu, Y. Effect of oxygen plasma-treated carbon fibers on the tribological behavior of oil-absorbed carbon/epoxy woven composites, Composites Part B. Engineering. 43: 2395–2399 (2012)

    8. Zhou, N., Yu, B., Sun, J., Yao, L. Qiu, Y., Influence of chemical treatments on the interfacial properties of ramie fiber reinforced poly (lactic acid) (PLA) composites, Journal of Biobased Materials and Bioenergy, 6: 564-568 (2012)

    9. Zhang, R., Pan, X., Jiang, M., Peng, S., Qiu, Y., Influence of atmospheric pressure plasma treatment on surface properties of PBO fiber, Applied Surface Science. 261: 147– 154 (2012)

    10. Yao, L., Wang, X., Xu, F., Jiang, M., Zhou, D., and Qiu, Y. Effect of wire space and weaving pattern on performance of microstrip antennas integrated in the three dimensional orthogonal woven composites applied composites materials. Applied Composite Materials. 19 (1): 21-30 (2012).

    11. Wang, X., Yao, L., Zhou, D., Qiu, Y. Design and characterization of conformal microstrip antennas integrated into 3d orthogonal woven fabrics. Journal of Engineered Fibers and Fabrics. 7(2): 76-80 (2012)

    12. Ji, F., Hong, Y., Yao, L., Peng, S., Qiu, Y. Effect of glycerol coating on the atmospheric pressure plasma treatment of UHMPE fibers. Journal of Adhesion Science and Technology. 26(1-3): 289-301 (2012)

    13. Li, Y., Yao, L., Ji, F., Peng, S., Gao, Z., Sun, S., Qiu, Y. Influence of moisture on effectiveness of plasma treatments of polymer surfaces. Journal of Adhesion Science and Technology, 26:1123-1139 (2012)

    14. Li, X., and Qiu, Y. The effect of plasma pre-treatment on NaHCO3 desizing of blended sizes on cotton fabrics. Applied Surface Science. 258(11): 4939–4944 (2012)

    15. Zhou, Z., Wang, J., Huang, X., Zhang, L., Moyo, S., Sun, S., Qiu, Y. Influence of absorbed moisture on surface hydrophobization of ethanol pretreated and plasma treated ramie fibers. Applied Surface Science. 258:4411–4416(2012)

    16. Liu, W., Zhao, H., Inoue, Y., Wang, X., Bradford, P.D., Kim, H., Qiu, Y., Zhu, Y. Poly(vinyl alcohol) reinforced with large-diameter carbon nanotubes via spray winding, Composite Part A : Applied Science and Manufacturing, 43:587-592 (2012)

    17. Li, X., Lin, J. and Qiu, Y. Influence of He/O2 atmospheric pressure plasma jet treatment on subsequent wet desizing of polyacrylate on PET fabrics, Applied Surface Science, 258:2332-2338 (2012)

    18. Wang, C. Qiu, Y. Study on wettability improvement and its uniformity of wool fabric treated by atmospheric pressure plasma jet, Journal of Applied Polymer Science. 123(2): 1000-1006 (2012)

    19. Xu, F., Yao, L. Wang, X. Qiu, Y. Effect of conductive yarn crimp in radiation patch of 3d integrated microstrip antenna on its performance. Composites Part B. Engineering. 43:465-470 (2012)

    20. Sun, S. and Qiu, Y. Influence of moisture on wettability and sizing properties of raw cotton yarns treated with He/O2 atmospheric pressure plasma jet, Surface & Coatings Technology, 206:2281-2286 (2011)

    21. Tian, L., Nie, H., Chattertonc, N.P., Branford-Whitec, C.J., Qiu, Y., Zhu, L. Helium/oxygen atmospheric pressure plasma jet treatment for hydrophilicity improvement of grey cotton knitted fabric, Applied Surface Science, 257(16): 7113–7118 (2011)

    22. Zhao, Y., Zhang, C., Shao, X. Wang, Y. Qiu, Y. The influence of atmospheric plasma treatment on carbon fiber/matrix interfacial adhesion. Journal of Adhesion Science Technology. 25:2897-2908 (2011)

    23. Liang, Y., Lin, Z., Qiu Y. Zhang, X. Fabrication and characterization of LATP / PAN composite fiber-based membrane lithium-ion battery separators. Electrochimica Acta. 56:6474-6480 (2011)

    24. Gao, Z. Sun, S., Peng, S., Yao, L., Qiu, Y. The surface modification of nylon 6 films treated with he/o2 atmospheric pressure plasma jet, Journal of Applied Polymer Science. 120: 2201–2206 (2011)

    25. Xie, J., Xin, D., Cao, H., Wang, C., Zhao, Y., Yao, L., Ji, F., Qiu, Y. Improving carbon fiber adhesion to polyimide with atmospheric pressure plasma treatment, Surface & Coatings Technology. 206: 191-201 (2011)

    26. Sun, Ji. Yao, L., Sun, S., Qiu, Y. ESR study of atmospheric pressure plasma jet irradiated Kevlar 49 fibers, Surface & Coatings Technology. 205: 5312–5317 (2011)

    27. Liu, W.,Zhang, X., Xu, G., Bradford, P. D., Wang, X., Zhao, H. Zhang, Y., Jia, Q., Yuan, F. G., Li, Q., Qiu, Y., Zhu, Y. Producing superior composites by winding carbon nanotubes onto a mandrel under a poly(vinyl alcohol) spray. Carbon. 49: 4786-4790 (2011)

    28. Xu, F., Yao, L., Zhao, D., Jiang, M., Qiu, Y. The effects of the resin layer in the patch structure to the antenna performance of a three dimensional integrated microstrip antenna, Journal of Composite Materials, 45(15): 1627 - 1635 (2011)

    29. Liang, Y., Ji, L., Guo, B., Lin, Z., Yao, Y., Li, Y., Alcoutlabi, M., Qiu, Y., Zhang, X. Preparation and electrochemical characterization of ionic-conducting lithium lanthanum titanate oxide/polyacrylonitrile submicron composite fiber-based lithium-ion battery separators, Journal of Power Sources. 196: 436-441. (2011)

    30. Zhou, Z., Liu, X., Hu, B., Wang, J., Xin. D., Sun, J., Yao, L., Qiu, Y. Hydrophobic atmospheric pressure plasma treatment of ramie fibers with ethanol pretreatment. Surface & Coatings Technology. 205: 4205–4210 (2011)

    31. Yao, L., Jiang, M., Zhou, D., Xu, F., Zhao, D., Zhang, W., Zhou, N., Jiang, Q., Qiu, Y. Fabrication and characterization of microstrip array antennas integrated in the three dimensional orthogonal woven composite, Composites Part B. 42:885-890 (2011)

    32. Sun, J. Yao, L. Sun, S. Gao, Z. Qiu. Y. Effect of storage condition and aging on acrylic acid inverse emulsion surface-grafting polymerization of PET films initiated by atmospheric pressure plasmas. Surface & Coatings Technology. 205: 2799–2805 (2011)

    33. Sun, S., Sun, J., Yao, L. Qiu, Y. Wettability and sizing property improvement of raw cotton yarns treated with He/O2 atmospheric pressure plasma jet. Applied Surface Science, 257: 2377–2382 (2011)

    34. Du, C., Zhong, S., Yao, L., Qiu, Y., Four element textile array antenna on three dimensional orthogonal woven composites. Microwave and Optical Technology Letters, 52(11): 2487-2488. (2010)

    35. Zhang, Y., Wu, H., Qiu, Y., Morphology and properties of hybrid composites based on polypropylene/polylactic acid blend and bamboo fiber. Bioresource Technology, 101(20): 7944-7950. (2010)

    36. Wang C. X.; Du M.; Qiu Y. P. Influence of pore size on penetration of surface modification into woven fabric treated with atmospheric pressure plasma jet, Surface & Coatings Technology, 205(3):909-914 (2010)

    37. Xu, F., Yao, L., Zhao, D. Zhao, L., Jiang, M. Qiu, Y. Performance and Impact Damage of a Three Dimensionally Integrated Microstrip Feeding Antenna Structure, Composite Structures. 93: 193–197 (2010)

    38. Sun, S., Gao, Z. Peng, S., Yao, L., Wang, C., Qiu, Y. Surface modification of PET films by atmospheric pressure plasma induced acrylic acid inverse emulsion graft polymerization, Surface & Coatings Technology. 204: 4101–4106 (2010)

    39. Peng, S., Liu, X., Sun, S., Gao, Z., Yao, L., Qiu, Y.Influence of absorbed moisture on desizing of poly(vinyl alcohol) on cotton fabrics during atmospheric pressure plasma jet treatment, Applied Surface Science. 256: 4103–4108 (2010)

    40. Wen, Y. Li, R., Cai, F. Fu, K. Peng, S. Jiang, Q. Yao, L. Wang, C. Qiu, Y. Influence of ethylene glycol pretreatment on effectiveness of atmospheric pressure plasma treatment of polyethylene fibers, Applied Surface Science. 256: 3253–3258 (2010)

    41. Peng, S. Gao, Z. Sun, S., Yao, L., Wang, C., Qiu, Y. Influence of absorbed moisture on solubility of poly(vinyl alcohol) film during atmospheric pressure plasma jet treatment, Surface & Coatings Technology. 204:1222–1228 (2010)

    42. Gao, Z., Peng, S., Sun, J., Yao, L., Qiu, Y. The influence of moisture on atmospheric pressure plasma etching of PA6 films. Current Applied Physics. 10:230-234 (2010)

    43. Zhang, Y., Zhu, H., Huang, J., Zou, J., Wu, H., Qiu, Y.,Effects of oxygen plasma treatment on tensile deformation of nano-SiO(2) sol-gel coating ultra-high molecular weight polyethylene filaments. Acta Physica Sinica, 58(6): S292-S297. (2009)

    44. Zhang, Y., Zhu, H., Wu, H., Qiu, Y., Effects of helium plasma treatment on tensile behaviour of nano-SiO(2) sol-gel coating T300 carbon fiber. Acta Physica Sinica, 58(6): S298-S305. (2009)

    45. Gao, Z., Peng, S., Sun, J., Yao, L., Qiu, Y. Surface modification of polyamide 6 film by He/CF4 plasma using atmospheric pressure plasma jet. Applied Surface Science. 256: 1496–1501(2009)

    46. Yao, L. Wang, X. Xu, F. Zhao, D., Jiang, M. Qiu, Y. Fabrication and impact performance of three dimensionally integrated microstrip antennas with microstrip feeding and co-axial feeding, Smart Materials and Structures.18:095034 (2009).

    47. Peng, S. Gao, Z. Sun, J. Yao, L. Qiu, Y. Influence of argon/oxygen atmospheric dielectric-barrier discharge treatment on desizing and scouring of poly(vinyl alcohol) on cotton fabrics, Applied Surface Science. 255: 9458–9462 (2009).

    48. Xu, H., Peng, S., Wang, C., Yao, L., Sun, J., Ji, F. Qiu, Y. Influence of Absorbed Moisture on Anti-Felting Property of Wool Treated with Atmospheric Pressure Plasma. Journal of Applied Polymer Science. 113(6): 3687-3692 (2009).

    49. Gao, Z., Peng, S., Sun, J., Yao, L., Qiu, Y. Influence of processing parameters on atmospheric pressure plasma etching of polyamide 6 film. Applied Surface Science. 255: 7683–7688 (2009)

    50. Yao, L. and Qiu, Y., Microstrip antennas integrated in three dimensional orthogonal woven composites. Composites Science and Technology. 69: 1004–1008 (2009)

    51. Jiang, Q. Li, R. Sun, J. Wang, C. Peng, S., Ji, F. Yao, L. Qiu, Y. Influence of Ethanol Pretreatment on Effectiveness of Atmospheric Pressure Plasma Treatment of Polyethylene Fibers. Surface & Coatings Technology. 203: 1604–1608(2009)


    专利专著
    近三年获得授权发明和实用新型专利

    1. 姚 澜;邱夷平,专利名称:构成基于三维正交机织物的共形承载微带天线结构的方法

    2. 张 坤;高天琪;陈 余;周 沁;赵 达;蒋牧文;姚 澜;纪 峰;张迎晨;邱夷平,专利名称:一种发动机压气机包容环的织造方法

    3. 许福军;邱夷平;姚澜,专利名称:具有正交结构与平纹结构的三维机织物的制备方法

    4. 邱夷平;蒋牧文;姚澜;周冬春;赵达;张坤;张文文;吴昊;姜茜;周楠婷,专利名称:基于三维正交机织物的共形承载微带阵列天线的织造方法

    5. 许福军;邱夷平;姚澜,专利名称:一种无树脂覆盖的三维机织物共形承载微带天线的模塑成型方法

    6. 许福军;邱夷平;姚澜,专利名称:一种无树脂覆盖的三维正交机织复合材料的模塑成型方法

    7. 周冬春;赵达;姚澜;张文文;吴昊;蒋牧文;张坤;周楠婷;姜茜;张博文;罗瑞;邱夷平,专利名称:聚四氟乙烯基三维正交复合材料的制备方法

    8. 张迎晨;朱海燕;吴红艳;邱夷平,专利名称:蒙脱土/聚丙烯/聚乳酸复合纤维材料及其制备方法

    9. 张迎晨;秦 翊;吴红艳;邱夷平,专利名称:纳米氧化锌/聚丙烯/聚乳酸复合纤维材料及其制备方法

    10.张迎晨;吴红艳;邱夷平,专利名称:等离子体处理涂覆碳纳米管溶胶玄武岩纤维表面改性方法

    11.张迎晨;邹 静;吴红艳;邱夷平,专利名称:碳纳米管/聚丙烯/聚乳酸复合纤维材料及其制备方法

    12.张迎晨;吴红艳;邱夷平,专利名称:等离子体处理涂覆纳米溶胶的碳纤维表面改性的方法

    13.张迎晨;邹 静;吴红艳;邱夷平,专利名称:等离子体处理涂覆纳米二氧化硅的碳纤维表面改性的方法

    14.张迎晨;朱海燕;吴红艳;邱夷平,专利名称:等离子体处理涂覆纳米二氧化硅溶胶的Vectran纤维表面改性的方法

    15.张迎晨;吴红艳;邱夷平,专利名称:金属氧化物纳米粉体大气压常温等离子体改性处理方法

    16.发明人:张迎晨;黄婧南;邱夷平,专利名称:等离子体纳米二氧化钛/聚丙烯/聚乳酸及其制备方法

    17.章倩 邱夷平 房晓萌 陆春红 姚一舟 李凌晨 章悦庭,专利名称:一种三维正交机织麻织物增强聚丙烯复合材料

    18.张迎晨;吴红艳;邱夷平,专利名称:等离子体处理纳米溶胶超高分子量聚乙烯纤维改性的方法

    19.张迎晨;吴红艳;邱夷平,专利名称:等离子体处理纳米溶胶Vectran纤维改性的方法

    20.张迎晨;吴红艳;邱夷平,专利名称:等离子体处理超高分子量聚乙烯纤维改性的方法

    21.张迎晨;秦翊;吴红艳;邱夷平,专利名称:等离子体处理纳米溶胶凯夫拉纤维改性的方法

    22.章倩,刘万军,钱浩,何源,蒋慧,郁崇文,章悦庭,邱夷平,专利名称:实验室用多功能微型脱胶机


  • 获奖荣誉

    获奖荣誉
    1. 《纺织材料学》国家级教学团队负责人

    2. 《纺织材料学》国家级双语示范课程负责人

    3. 《纺织材料学》国家级精品课程项目,排名第二

    4. 《纺织结构复合材料》上海市全英语示范课程负责人

    5. 2012年 上海市大学生暑期社会实践活动优秀指导老师.

    6. 2012年 东华大学大学生暑期社会实践“优秀指导老师”.

    7. 2012年 东华大学大学生创新活动项目优秀指导老师.

    8. 2006、2008、2011年 东华大学十佳“我心目中的好老师”.

    9. 2011年 上海市大学生暑期社会实践活动优秀指导教师.

    10. 2009年 第十一届上海市大学生课外学术科技作品竞赛暨第十一届“挑战杯”上海市选拔赛优秀指导教师.

    11. 2013年第十二届上海市大学生课外学术科技作品竞赛暨第十二届“挑战杯”上海市选拔赛优秀指导教师。

    2007年上海市科教系统“比翼双飞模范佳侣”

    2009上海市归侨侨眷先进个人

    2009首届上海市华侨华人专业人士“杰出创业奖”

    2008年获宝钢优秀教师奖

    2007年入选上海市领军人才“地方队”后备队

    2009年上海市教学成果奖一等奖“纺织工程专业“三位一体”学生创新能力培育体系的改革和实践”排名第三;

    2011年 中国纺织工业协会纺织高等教育教学成果一等奖“大众化教育背景下分层次培养高素质纺织专业人才的改革与实践”排名第一;

    2010年 中国纺织工业协会纺织高等教育教学成果二等奖“本科生毕业论文培养模式探讨与实践”排名第一;

    2013年,东华大学 “优秀教学育人奖”


  • 其他信息

    社会任职

    i.国内外期刊的审稿人或编委;

    1. Textile Research Journal

    2. Journal of Industrial Textiles

    3. Journal of Adhesion Science and Technology

    4. Review of Adhesion and Adhesives

    5. Journal of Fiber Bioengineering and Informatics

    6. International Journal of Textile Science and Technology

    7. 纺织学报

    ii. 协会或学会的委员与负责人;

    1. 美国尖端材料技术学会(SAMPE)上海分会理事长

    2. 长宁区侨联副主席

    3. 长宁区政协委员

    4. 上海市侨界知识分子联谊会成员

    iii. 学校或学院的职务;

    1. 纺织材料与纺织品设计国家二级重点学科带头人

    2. 纺织面料教育部重点实验室学术委员会主任

    3. 集美娱乐_集美娱乐场【官网】博士后流动站站长

    4. 东华大学校学术委员会委员

    5. 东华大学校教学委员会委员

    6. 东华大学校研究部专家咨询小组成员


    国际交流

    1. 美国机械工程师学会(ASME)纺织工程分会主席(2004年)

    2. 北卡州立大学纺织工程、化学与科学系科学顾问委员会委员

    3. 北卡罗来纳州立大学机械与航空工程系客座教授(2003 – 2006年)

    4. 美国尖端材料学会(SAMPE)会员、美国纤维学会会员、美国机械工程师学会会员



返回原图
/

友情链接:鸿运国际_鸿运国际手机版_鸿运国际欢迎你  齐乐娱乐_齐乐娱乐网站_齐乐娱乐平台